72 in
Stenter finishing for suitable woven constructions.
Woven fabrics · Up to 72 in
Woven processing.
Control through every stage.
Wet processing, stentering, dimensional finishing and surface development for suitable woven constructions up to 72 inches.
Processing is reviewed against fibre composition, weave, width, weight, shade, hand and end-use requirement.
Discuss your requirementCapability overview
Woven finishing built around construction and handle.
Woven fabrics respond to tension, heat, moisture and mechanical action according to their fibre and structure. The route must account for all of them.
Bhuria’s woven platform includes Long Jet, Soft Flow, C-Jet and jigger processing, supported by stenter finishing up to 72 inches. Calendering, zero-zero finishing and decatizing-related finishing may be selected where suited to the required result.
Lafer finishing machinery forms part of selected surface-finishing routes. It is presented as equipment capability—not as a standalone textile process.
4 routes
Long Jet, Soft Flow, C-Jet and Jigger capability.
Specification
Construction, composition, GSM, colour, finish and application.
Processing scope
Woven processing from wet route to final hand.
The exact sequence is agreed only after the incoming fabric and finished requirement are understood.
Jet processing
Long Jet, Soft Flow and C-Jet options provide alternative handling routes for suitable woven constructions.
Jigger processing
Open-width processing for applicable woven fabrics where the construction and requirement support the route.
Stenter finishing
Controlled width, heat and finishing up to 72 inches on the conventional woven platform.
Calendering
Mechanical treatment used where surface, lustre, density or hand requirements call for it.
Dimensional finishing
Zero-zero and related finishing options for applicable dimensional and appearance objectives.
Decatizing-related finishing
Decca/decatizing-related capability can be reviewed for suitable woven requirements; exact terminology and route are confirmed during technical discussion.
Equipment & finishing
Woven portfolio conversations.
These fabric families indicate a possible portfolio. Suitability depends on fibre, weave and requested processing.
- TwillDiagonal-weave constructions for apparel and application-led requirements.
- SatinSmooth-faced constructions where appearance and handle are central.
- Poplin, voile & cambricFine and lightweight woven constructions requiring controlled processing.
- Crepe & chiffonLightweight and surface-character constructions reviewed according to composition.
- Dobby & jacquard structuresStructured woven surfaces requiring construction-aware finishing.
- DenimDenim-related enquiries reviewed against construction and requested finish.
- OrganzaCrisp, sheer constructions reviewed for compatible processing routes.
Relevant applications
Where woven capability can be relevant.
Applications are discussed against the exact fabric and required performance, not selected from a fixed catalogue.
Apparel & fashion
Shirting, dresses, bottoms and other apparel-oriented woven requirements.
Home furnishing
Curtain, drapery, bedding, cushion and related interior textile processing.
Application-led textiles
Finishing developed around a defined use, appearance or performance requirement.
Buyer questions
Technical questions, answered directly.
What width of woven fabric can Bhuria process?
The conventional woven line supports stenter finishing up to 72 inches. Suitable wider constructions can be reviewed through the 74-to-132-inch wide-width platform.
Does Bhuria offer jigger processing?
Yes. Jigger processing is available for suitable woven fabrics, alongside Long Jet, Soft Flow and C-Jet routes.
Can a buyer specify a particular woven finish?
Yes. Send the construction, composition, width, GSM, colour, finish, quantity and end use so the team can review a suitable process route.
Related capabilities
Continue the specification review.
Start with the specification
Have a fabric requirement?
Send the construction, composition, width, GSM, finish, quantity and intended application. Our team can review the requirement against available processing routes.